This is a five-axle crane in a smaller scale than 42009, without PF. It has most functions of 42009, except the V6 engine and the third boom stage. It has a separate jib instead, and a separate counterweight. And, it does have another really nice feature that is not in 42009! Can you guess?
The four outriggers move simultaniously horizontally, then vertically. Same as in 42009.
The crane can rotate 360 degrees, but this is not driven.
The LAs raise the main boom.
The boom has one extending inner section.
There is also a jib that can be mounted manually using 5L axles with stop. The red boom head can be separated, and then mounted on the end of the jib using the same axles.
The counterweight can be put on the carrier, behind the cabin, but can also be mounted at the back of the superstructure; using the knob at the back of the superstructure as a holder.
The main cabin has doors that can open
The ground clearance of the crane is a bit more than that of other sets.
See more on my site: Orange crane on (in Dutch).


Name Five-axle crane
Designer ErikLeppen
Designed 2016
Parts 2061
Theme Technic > Model > Construction
Already have some of the parts? Use the Build this MOC page to only show the parts you are missing.
Create an account to change the default filters used.
Waiting for Inventory to load...
Submitted by Ivan_M May 30, 2017
Rewarding building experience with many features. If you have the parts build it!

There are many pins with pin holes (15100), around 20 of them can be replaced with more ordinary perpendicular connectors (6536). 22 pieces of thin 5L liftarm are used for optional jib, boat weights are also not necessary to have, I have replaced them with ordinary black bricks.