ICARUS Supercar

FOLLOWERS

4159

LIKES

Login to hide ads!

MOC-4562

Name ICARUS Supercar
Designer Madoca1977
Designed 2016
Inventory 1906
Theme Technic
Gingerbread House

50 COMMENTS

  • 1 week, 3 days ago astyanax (997)
    Had so much fun building this beastly beauty! Amazing learning experience too, thanks to the very advanced building techniques.
    I slightly modified my car to make the doors pneumatic and remotely openable:
  • 1 month ago __I__ (2K)
    Finally finished (minus the 2 sbrick and battery pack but even with the added 6 cylinder boxer engine, there's room down the sides behind the seats). As it's going to be a display model, I'm not bothering and may end up removing the motors that I pinched from a broken down model.
    Many thanks to my brother-in-law for color matching the orange and airbrushing the #64681 and #64393 panels at his work. He did a great job and there's only a very slight noticeable difference in shade.
    Come on Lego, it's about time you released some sets with them in
  • 2 months, 2 weeks ago HiT (1651)
    looks so real especially when you "park" it in the outdoor!
  • 6 months ago tr0922 (370)
    Can U replace the PFs into 2 rc motors and a 9v battery pack with servo(Auxiliary output)?
    'Cause that's all I have(Set 8475).
  • 6 months, 2 weeks ago Kaydash (394)
    Is it possible to easily built it in manual?
  • 7 months, 2 weeks ago __I__ (2K)
    This has been on my radar for ages and fingers crossed it'll be my next build once the Pagani Hyuara is done. I intend for it to be a non-motorised version coupled with a suitable gearbox.
    Drip-feed of necessary parts already in progress...
  • 10 months ago RobertBrick (1654) MOC Designer
    I'm loving it! It's the best looking supercar I ever built.
  • 1 year, 3 months ago cardanoBill (65)
    Hi all,

    This MOC is brilliant. Thank you very much for @Madoca1977. Just having a question and need your help. Please have a look at here: https://www.facebook.com/photo.php?fbid=196444011212392&l=079f1ccb4c (it is the 2nd picture of the Building instructions, the one on the right of the fully completed car screen. Sorry, I can not insert the image in the post). The 02 Lego pieces in the blue circle (next to the re-chargeable battery box) is not presented in the Inventory and unfortunately, I do not know its code. Is there any one of you could help me capture the piece code and show where it can be bought?

    Many thanks.
  • 1 year, 3 months ago BabaTen10 (80)
    I just finished the MOC with 2 IR receivers it works good but the speed is way to low . I am using standard technic battery boxes and high quality full batteries. 
    Sometimes the car drives well but after a couple seconds it nearly stands.
    I tried everything and if the car doesn't stands at the floor the engine works well . 
    The weight can't be to high because madoca's car drives very fast and I used the same parts at without the receivers and the battery boxes.
    I also tried it without body so it is much lighter and it also didn't work.
    Any ideas ?
    • 1 year, 3 months ago asiadream (3K)
      How 2 IR can drive 4 L motors and 1 servo?
      • 1 year, 3 months ago BabaTen10 (80)
        I put two to l motor cables to the the blue input of the left IR and two l motor cables to the red input of the right IR.
        The servo cable is also in the last left IR in the red input .
        I connected the red and the blue steering stick of the two remote controllers and swap the directions of one
  • 1 year, 6 months ago Mares123 (413)
    Hello!

    First of all: That model looks great! I am willing to invest some money in rebuilding it. Thanks for all the afford you put into it! 

    However you are using that 11949 Part for the steering mechanism. The problem with that is, that its not available under 30€ in Germany which is the price of 2 L-motors, per piece. My question would be, if it is possible to use the way cheaper 23801 together with two "axle with ball" pieces (2736) for the steering mechanism. So if anybody has ever tried that, or has the parts to try it, I would be glad to hear if that is an option! investing 120 € into 4 Parts is very expensive in my eyes. 
    I tried to check the size of the parts using LDD and stud.io but both softwares do not have both parts included in their database (or I am stupid).
  • 1 year, 8 months ago Dartie (606)
    Just completed this MOC. Awesome instructions! Demanding and well-thought-out. 
    I just don't like the front wheel housing - it's too wobbly in my judgement. I will try to find a solution that is comparable to the rear covering, which is great modeled. 
    And well, those doors... they look good. That's all
  • 2 years ago steveh (1227)
    Just finished building the Icarus. Yet another really cool MOC from Madoca. Love the doors!
  • 2 years, 1 month ago dadar0 (852)
    Currently building this, the curves and shapes you're able to achieve is mind-boggling!
    Everything is braced and secured, its a super solid build.
    I can see myself disassembling and then immediately reassembling it again just to experience the build process all over again.
    I think it has earned a permanent spot on my shelves.
    Currently on step 157/199, and I'm waiting on one last order (should arrive early next week), before I can continue on.
    Cheers for sharing this with us.
  • 2 years, 4 months ago LUCAS77 (19K)
    It was so cool that I couldn't talk.
  • 2 years, 4 months ago guilford (840)
    I built this in red and it really is a phenomenal design. My first few bouts of firmware upgrades with SBrick were a bit frustrating to deal with, but things seem to be in a working state now and the car is fun to drive around. Thank you, Madoca1977, for publishing the instructions for such an amazing build for free. This car easily tops all of the official Technic sets I've built, save perhaps my sentimentality for 8480.
  • 2 years, 4 months ago ADigitalSock (30)
    This is one of the most beautiful Mocs I've ever seen. I so wish I could afford to build it.
  • 2 years, 5 months ago The_Brickster_35 (3K) MOC Designer
    Calculated the price of all of Madoca's projects plus the necessary SBricks, and it came out to just under $16,000. Cheers Madoca, now I'm broke ;)
    • 2 years, 5 months ago TeagueO (35K) MOC Designer
      Good luck with the lottery lol  I would love to build this someday.
  • 2 years, 5 months ago MEDDO (1299)
    Done, best set I ever built, highly recommended if you can afford it, thanks madoca
  • 2 years, 5 months ago TeagueO (35K) MOC Designer
    Almost half way there...
  • 2 years, 6 months ago 1963maniac (12K) MOC Designer
    This is one awesome looking supercar!!
  • 2 years, 6 months ago Turbo8702 (84K) MOC Designer PRO
    I so wish I had more technic parts to build this! This is totally amazing! You could make this a set and it would be a best seller for sure. Nice job
  • 2 years, 7 months ago Sickboy (20)
    I built this absolutely beautiful MOC. It is a gem! Can someone give me advise on where I should/could list this to sell, please?
  • 2 years, 7 months ago br0ken4life (852)
    I am speechless, I finaly finished this amazing super car! The lines, the intricate build, how solid the body is reinforced everything in this MOC screams perfection. Thank you so much Madoca for releasing this Moc for free, I can say its something I would have gladly paid for. Ive been trying to use an SBRICK Plus and added a Motion Sensor to stop it from crashing but haven't figured out the circuit yet. If anyone can help please let me know.

    Again thank you so much Madoca, cant wait for the next MOC!
  • 2 years, 7 months ago Ozlad84 (459)
    Really well done and very clear photo sequence! I enjoyed building it immensely.  Thanks for sharing.
  • 2 years, 7 months ago weeblesfall (59)
    Simply superb. I've just built this and I'm amazed at your ability to cram the mechanicals so effectively into such a tight space and also craft this beautifully intricate body design. Thank you for taking the time to design this and provide instructions for free.
  • 2 years, 9 months ago Technilego (423) MOC Designer
    I thing is a powerful MOC
  • 2 years, 9 months ago Scapuc (2K)
    Done! This moc is amazing.
    The style is beautiful, as well as mechanics.
    Thank you for sharing with us all the free instructions.
    Bravo!
  • 2 years, 10 months ago rynoster (81)
    Thank you Madoca for a brilliant MOC, and even better, providing free instructions!

    Any chance there is a parts list with the red configuration? I would like to do mine in red but not sure which parts to do exactly.
    • 2 years, 10 months ago rynoster (81)
      Thanks, that did the trick.

      Seems like red is a lot more rare, about $100 more expensive than white.
Load More Comments
to your account to add or reply to comments.
Already have some of the parts? Use the Build this MOC page to only show the parts you are missing.
Create an account to change the default filters used.

Waiting for Inventory to load

Submitted by __I__ Sept. 14, 2019
Submitted by __I__ Sept. 12, 2019
Submitted by Frankie92 June 26, 2019
Submitted by commoc June 20, 2019
Submitted by grzegorz May 27, 2019
Submitted by dede_aja_tuh April 14, 2019
Submitted by commoc April 14, 2019
Submitted by Technic72fan PRO April 6, 2019
Submitted by [email protected] Feb. 25, 2019
Submitted by [email protected] Feb. 20, 2019
Submitted by DANQUISH Feb. 18, 2019
Modded version of Madoca's original design. :)
Custom fender flares and body panels were modeled and 3D printed to achieve the desired "Liberty Walk" design aesthetic.
Submitted by Antoc Feb. 17, 2019
Submitted by bgkim Sept. 27, 2018
Submitted by bgkim Sept. 27, 2018
Submitted by joonghyung Sept. 3, 2018
Submitted by joonghyung Sept. 3, 2018
Submitted by OleJka May 23, 2018
Submitted by OleJka May 23, 2018
Submitted by k2k81 Nov. 5, 2017
Submitted by k2k81 Nov. 5, 2017
Submitted by k2k81 Nov. 5, 2017
Submitted by k2k81 Nov. 5, 2017
Submitted by k2k81 Nov. 5, 2017
Submitted by Tony Zhang Nov. 4, 2017
Submitted by Tony Zhang Nov. 4, 2017
Submitted by Tony Zhang Nov. 4, 2017
Submitted by Tony Zhang Oct. 29, 2017
Submitted by Tony Zhang Oct. 29, 2017
Submitted by Tony Zhang Oct. 29, 2017
Submitted by steveh Sept. 30, 2017
Submitted by OneMoreRobot PRO Sept. 10, 2017
Submitted by SilenWin Aug. 11, 2017
Mad Max style MOD
Submitted by SilenWin Aug. 11, 2017
Mad Max style MOD
Submitted by eipphanyoo July 27, 2017
Submitted by eipphanyoo July 27, 2017
Submitted by Nathan ADMIN July 1, 2017
Submitted by shijialin88 June 8, 2017
Submitted by Kalps1811 June 4, 2017
Submitted by MEDDO May 27, 2017